How To Remove Tv From Wall Mount Sanus. 1 2 (c) (b) 1. Answer hi napapaul, to remove the tv, unplug the cables, then pull the safety cords to unlock the mount, then carefully lift the tv off of the mount.
But i could remove my 65 tv from no gap wall mount. Carefully try to find the two pieces of string from the back of the tv bottom.
360 Degree Rotating TV Standing Lcd Tv Base Stand With
Consider this when selecting the location of your wall mount. Consider this when selecting the location of your wall mount.
How To Remove Tv From Wall Mount Sanus
For visual reference this is outlined on page 21 of the im which can be found this products page on our website.Get the best picture quality anywhere in a room with smooth swivel, pan and extend motions up to 15.8 from the wall.Hammer into the wall, but be careful not to hammer too hard and have your anchor sink into the drywall.I need to remove my television from my sanus tv mount.
I’ve tried lifting up on the television and it won’t budge.If necessary, loosen the carriages (c) using the 3/16 allen key .If you cannot find either the set screws or the quick release clamps, then see if you can take a photo of both sides, top and bottom of the wall mount and post back to me please.If you have a video game console, movie player, and other accessories connected to your tv, make sure to disconnect them and set them aside.
If your tv is too loose or.In order to move the arm along the bracket, you have to remove the tv from the arm, remove the cover strips, loosen the locking screw with a hex key, slide the arm to the desired position, tighten locking screws, and reattach the cover strips and then reattach the tv.Insert tube assemblies  through brackets [01, 02].It appears you pull these down to be able to then tilt the bottom of the tv out and lift off the mount.
Its slim design allows your tv to sit just 1.7 from the wall when retraced.Lift the center plate (c) of the wall plate  up and away from  the back plates (b).Look behind the tv as you do this, to ensure the hooks or other hanging apparatus have cleared the mounting bar on the wall mount.Lower the tv straight down to the floor.
Mount will shift 95.4 mm (3.75 in.) in either direction from the center when in the home position.Not sure on yours, but the current sanus stand sold at best buy has two metal hooks where the strings attach at the bottom of the arms the tv attaches to.Now further rotate it passing the tention point so that the tv comes out from wall mount bracket from one side.Now you can see that a one side is clear.
Once you’ve pulled on these tabs, swing the tv up and away from the wall.Our cutting edge innovations include a complete selection of tv mounts, media furniture, speaker stands and mounts, racks and other av accessories.Our exceptional products offer unparalleled strength, stability and functionality to fit any need.Outer edges of your tv.
Position the arm assembly 20 on the wall plate 16 by tilting the top into the wall plate channel, then rotating the bottom toward the wall.Position the tv leaning against a wall or other solid surface, until it is moved or packaged.Pull it hard and you will hear a click sound, subsequently the bottom of the tv will pop further away from the wall.Pull the bottom of the tv away from the wall, remove all cords attached to the.
Remember you are going to want the holes to be smaller than the anchors to get a secure fit.Remove the mounting plate and drill in the pilot holes with a drill.Remove the nuts (n) and washers (w) from the threaded studs (a) of the wall plate .Removing the tv from the mounting plate will allow access to a/v component cables.
Removing the tv to remove your tv from the wall mount 16 , disconnect all cables and then reverse the procedures in step 3.Rotate the tv to your left or right until it stops rotation.Sanus systems tv mount user manual (40 pages) tv mount sanus vmt15 instruction manual (44 pages).Secure using four wall plate screws 21 with hex key 25.
So here are the steps i followed :Take your anchor and place it in the hole.The first thing you need to do to remove your tv from its wall mount is to unplug everything.The instructions say to remove the locking screw and push in on the locking tab.
The tv is held onto the mount by vertical mounting bars you screw onto the back of the tv.Then you would pull the bottom of the tv out towards you, and lift the tv off of the wall mount.These are the absolute most common ways of removing tv’s from wall mounts.This is the tention point for rotation.
Tilt the tv slightly forward at the bottom and lift up.To remove the tv from the mount, there are two small tabs that hang down behind the tv that you pull on to release the bottom of the vertical brackets from the wall mount.To remove your tv from the wall mount disconnect all cables and then reverse the if your tv is too loose or too tight, adjust the arm tension screws using hex key procedures in step 3.Tv shifts 254 mm (10 in.) to the right or left when in the home position.
Unplug the cables and lay the tv face down on a soft surface to prevent damage.Using a standard philips screwdriver, remove the hook on arms from the back of the tv.We provide the best experience through design, support, and ease of install.Welcome to sanus® vuepoint™ a comprehensive family of av mounting solutions designed to enhance your av system and surrounding decor.
Well i see that the installer never put in the locking screw and i simply unscrewed the tab.