How To Clean Primo Water Dispenser Drip Tray. (visit primowater.com for detailed cleaning instructions.) place probe assembly on hanger inside door to keep it clean. A ground fault interrupting receptacle.
Allow the cleaning solution to fill the reservoirs. Apply the cleaning bottle to the dispenser.
1217Z Zombietech SE Bead Blast Standard Glass
At least 4 inches of clearance on both sides. Be sure you dry thoroughly such that you will not leave any moisture in the tight spaces.
How To Clean Primo Water Dispenser Drip Tray
Clean cabinet surfaces with a soft cloth and warm soapy water, then rinse.Clean probe with a damp cloth and dish soap.Clean the drip tray and replace.Clean the water drip
Cleaning cold reservoir and water linesEverything you need to clean your primo water dispenser is easily found around the house or at a local store.Fill and rinse the reservoir 4 times with plain water to flush out the cleaning mixture.Grab a bottle of primo® water (sold separately) and fully remove the cap.
Hook up the cleaning bottle.How to clean primo water dispenser probe.How to clean water dispenser bottom load.enjoy a cool, refreshing glass of water or prepare your favorite hot or chilled beverages, soups, or oatmeal with ease.I did contact walmart customer service and showed them the ad w/the free water bottle that was supposed to come with it.
Insert probe assembly into bottle.Install drip tray & grid.Install water bottle bottle not included.Lift off the drip tray.
Locate dispenser on a hard and level surface in a cool shaded location near a grounded wall outlet.Locate dispenser on a hard and level surface in a cool shaded location near.Mix your cleaning solution in the water bottle.Move the primo water dispenser away from the wall, being careful not to tip or spill the water bottle.
Page 5 assembly keep plastic bags away from children.Place the tray and cover in a dishwasher or use a soft cloth and warm soapy water to wipe parts clean.Place tray and cover in dishwasher or wipe parts clean with a soft cloth and warm soapy water.Position dispenser so the back is at least 4 inches from wall and there are.
Pour the bleach (2 tbsp.) or vinegar (2 cups) and hot tap water (2 gallons) into the empty bottle.Properly dispose all of packaging.Push them in and remove the tray from the front.Remove drip tray and grid from protective packaging.
Remove drip tray assembly by pulling it forward.Remove drip tray assembly by pulling it forward.Remove screws and access the plastic clips from the rear.Replace parts and plug in.
Requires standard 11.3 to 18.9 litre water dispenser bottles.Slide drip tray assembly into position until it is secure.Slide drip tray into place.Some of them slide in and some of them simply rest on top of the indention where the water and ice dispensers are.
Take some paper towel, lightly dab into water.Take the portion of the tray that you removed to the sink and coat it in the vinegar water solution.The drip tray should easily come out of the unit.The free 5 gallon water bottle was not included.
Then, dry thoroughly, so no moisture is left in any tight space.There are 13 simple steps to cleaning your primo water dispenser:There are 4 screws on the rear metal grate.To get started, simply place the drip tray, load a bottle of primo® water and youâ ll be hydrating in no time, no plumbing or installation required.
Turn the screw slightly clockwise for colder water or counterclockwise for warmer water.Unpack drip tray and insert into dispenser.Unplug the power cord from the electrical outlet.Using the sponge, give the drip tray and water taps a thorough scrub and rinse with clean water.
Visit www.primowater.com to find primo water at a store near you.Wait 10 minutes then drain the water from the reservoirs as described in step 5.Water dispenser primo water 900130 user.What steps should you follow to clean your dispenser?
What supplies do you need to clean your dispenser?When the water dispenser has been thoroughly rinsed, reinstall the water guard and drip tray.Wipe dust from back of dispenser to improve efficiency.Wipe dust from the back of the dispenser to improve efficiency.
Wipe over the taps and drip tray with the paper.You should clean your drip tray at least once a week to make sure that all bacteria are removed before it becomes hazardous to your family’s health.